PLEASE NOTE THAT CARRIAGE COST IS BASED ON UK MAINLAND ONLY.
ALSO, SOME SCOTTISH HIGHLAND POSTCODES ARE ALSO EXCLUDED.
PLEASE CONTACT US BY EMAIL OR PHONE FOR DELIVERY COSTS TO
NORTHERN IRELAND, THE CHANNEL ISLANDS, THE SCOTTISH ISLES AND THE
SCOTTISH HIGHLANDS & ISLE OF MAN BEFORE PURCHASING.
The Sigma Euro-Comm SE HF X-80
The SE HF X-80 is an end
fed aluminium vertical antenna, capable of allowing the user to work 80 metres through 6 metres bands using an ATU, also not
requiring any counterpoise and can be fed using coax cable. The antenna can be
pole mounted at ground level or elevated depending on the user’s personal
requirements. The antenna is rated at 400 watts PEP. The antenna comes complete
with all fixings and fixtures and full installation guide.
How it works: The antenna is
fed using 50 Ohm coax via a SO-239 socket at the base of the unit. A 6:1 UNUN
transformer is located in an IP65 weather sealed box at the bottom of the 6
meter telescopic aluminium element. The
transformer reduces the impedance at the feed point to a more acceptable level
making the antenna much more efficient and allowing proper and easy tuning via
an external ATU and automatic ATU’s
found in most modern radios.
The antenna can be grounded
if the user experiences excessive local static noise, but as the UNUN is DC
grounded: grounding will not affect the tuning ratios.
The Highlighted bands in the chart below will require a manual ATU, the others an internal ATU.
3.5 MHz 80 m with Manual ATU 1.1
7 MHz 40 m with
10 MHz 30 m , with ATU 1.1
14 MHz 20 m with ATU 1.1
18 MHz 17 m with Manual ATU 1.1
21 MHz 15 m with ATU
24 MHz 12 m Manual ATU 1.1
28 MHz 10 m with ATU 1.1
50 MHz 6 m with Manual ATU 1.1
Please use a good quality 50 Ohm coax, RG-213 or Mini 8 are probably the best choice.
Type End fed vertical
Frequency TX / 3.5 – 50 MHz
RX / 1.8 – 55 MHz
Power handling 400 watts pep
Impedance 50 Ohms
Length 6 meters